Reach where standard vacuum attachments simply can't.
The Bend Brothers Extra Long Tapered Vacuum Crevice Tool is a precision vacuum attachment designed for cleaning the narrow gaps, recesses and hard-to-reach areas that are difficult to access with conventional vacuum nozzles.
At 245 mm long, the extended tapered design allows you to reach deep beside vehicle seats, into seat rails, between consoles, around trim and into other narrow spaces without needing to dismantle or reposition components.
The nozzle tapers down to a tip just 7.5 mm × 20 mm on the outside, with a 3.5 mm × 13 mm opening on the inside. The slim outside lets it slip into narrow gaps, and the small opening concentrates airflow for increased airflow velocity at the point of cleaning – ideal for pulling dirt, dust, debris and loose particles out of tight spots.
Will It Fit My Vacuum?
Made in two sizes: 32 mm (1¼") and 35 mm – it simply pushes onto your vacuum's wand or hose end, no adaptors needed.
30-second check: measure across the outside of your vacuum's wand or hose end.
About 32 mm → choose 32 mm. About 35 mm → choose 35 mm.
| 32 mm version fits |
35 mm version fits |
| Numatic Henry family (Henry, Hetty, James, Harry & more) |
Kärcher WD wet & dry vacuums |
| Pacvac Superpro backpack vacuums |
Miele vacuums |
| Most Vax & Electrolux barrel vacuums |
Powerfit 35 mm workshop vacuums |
| 1¼" shop & wet/dry vacuums |
Other 35 mm workshop & detailing vacuums |
| Any "universal 32 mm" vacuum or accessory set |
Any "universal 35 mm" vacuum or accessory set |
❌ Doesn't fit Dyson, Shark or clip-on cordless stick vacuums.
Not sure? Email a photo of your vacuum to sales@bendbrothers.com and we'll tell you which size you need.
Tip: grab the 2-Pack – one for the car kit, one for the house.
Designed for Automotive Detailing & Workshop Cleaning
Whether you're detailing a vehicle, cleaning a workshop, maintaining machinery or simply trying to reach those awkward areas around the home, this precision crevice tool provides considerably more reach and access than a standard vacuum nozzle.
It is particularly useful for:
- Cleaning alongside vehicle seats
- Removing dirt from seat rails and mounting areas
- Reaching between seats and centre consoles
- Cleaning narrow gaps around automotive trim
- Removing dust and debris from tight workshop spaces
- Reaching underneath and behind components
- Cleaning narrow recesses that standard vacuum heads cannot access
- Automotive detailing and interior cleaning
- General-purpose precision vacuuming
Long Reach. Small Tip. Greater Control.
The 245 mm extended length provides additional reach into deep or restricted areas, while the tapered profile allows the nozzle to progressively access smaller gaps.
At the working end, the tip is just 7.5 mm × 20 mm on the outside, so it fits into gaps most crevice tools can't. Inside, the 3.5 mm × 13 mm opening concentrates the available vacuum airflow, helping increase airflow velocity right where you're cleaning instead of relying on a large, unfocused vacuum opening.
3D Printed for a Purpose
Manufactured using additive manufacturing, this vacuum attachment features a purpose-designed geometry that would be difficult to achieve with conventional off-the-shelf vacuum accessories.
The result is a lightweight, practical and highly targeted cleaning tool designed around a specific problem: getting vacuum suction into places conventional attachments can't reach.
Key Features
-
245 mm overall length for extended reach
-
Extra-long tapered design for accessing narrow spaces
-
Tip outside: 7.5 mm × 20 mm – slips into tight gaps
-
Tip opening (inside): 3.5 mm × 13 mm – concentrates airflow
-
Available in 32 mm and 35 mm fittings
- Ideal for automotive detailing and interior cleaning
- Excellent for seat rails, gaps beside seats and centre consoles
- Useful for workshops, machinery and general cleaning
- 3D printed using additive manufacturing
- Lightweight and easy to handle
- Reusable and designed for repeated workshop use
If you regularly find yourself trying to vacuum dirt out of gaps that your standard crevice tool can't reach, this is the attachment designed to solve exactly that problem.
